How to Install Your Coyote SL 36 Grill Without Any Hassle

Installing a grill can feel intimidating, especially when it’s a high-end model like the Coyote SL-Series 36-Inch 4-Burner Natural Gas Grill. But with the right guidance, the process is straightforward, stress-free, and even enjoyable.

This guide will walk you through everything from unpacking and prep to final checks so your grill is ready for your next backyard cookout.

Explore the Coyote SL 36-Inch Grill to see the features we’ll cover in this step-by-step guide.

A Real Backyard Scenario

Imagine this: it’s a Saturday morning. You’ve finally received your brand-new Coyote SL 36 grill. The box is heavy, the parts are neatly packed, and the excitement is high.

You’ve hosted backyard barbecues before, but this grill is different. It promises precise temperature control, even heat distribution, and a stylish design that elevates your outdoor kitchen.

You’re ready to set it up, but questions start to pop up. How do you connect it safely? Where should it sit? What tools do you need?

By the end of this process, you’ll have a perfectly installed grill, ready for steaks, burgers, rotisserie chicken, and sides.

Unpacking and Preparing Your Grill

Start by carefully unpacking all the components. Lay them on a clean surface and check against the instruction manual. Typical components include:

• Grill body

• Control panel and knobs

• Burners and heat tents

• Rotisserie kit (if included)

• Side shelves and attachments

Make sure all parts are accounted for. Having everything ready before you begin prevents interruptions and ensures a smooth setup.

Tip: Keep the original packaging until the grill is fully installed. It’s handy in case you need to move or return parts.

Choosing the Right Location

The location of your grill is more than just aesthetics. Safety, ventilation, and convenience are key considerations.

• Place the grill on a flat, non-combustible surface.
  
  

• Ensure it’s at least 10 feet from any structure or flammable surface.
  
  

• Consider accessibility to gas lines and your prep area.
  
  

• Think about wind direction to prevent smoke from blowing into your patio or your neighbors’ space.
  
  

For more grill options and layout ideas, explore the Coyote Outdoor Grills collection.

Step-by-Step Installation Guide

1. Assemble the Main Body
Start by attaching the legs or stand, then place the main grill body securely. Ensure all screws are tight, but avoid over-tightening to prevent damage.

2. Install Burners and Heat Tents
Position burners correctly and place heat tents above them. This ensures even heat distribution and prevents flare-ups.

3. Connect the Gas Line
Use a flexible, approved natural gas hose or propane connection. Make sure connections are tight and leak-free. Always check for leaks using a soap-and-water solution.

4. Attach Control Panel and Knobs
Install the control panel and knobs according to the manual. Test all knobs to ensure smooth operation.

5. Add Shelves and Accessories
Attach side shelves, warming racks, and rotisserie attachments. These add functionality and convenience to your grill.

Safety First: Gas Connections and Testing

Before lighting your grill, double-check every gas connection. A small leak can be dangerous. Use the soap-and-water test:

• Mix dish soap with water in a spray bottle.
  
  

• Spray all gas connections.
  
  

• If bubbles appear, tighten the connection and test again.
  
  

Once everything is secure, ignite the burners according to the instruction manual. Start on low heat to ensure gas flows correctly.

Common Installation Questions Answered

Q: Can I install the grill myself or should I hire a professional?
A: Most experienced DIYers can install the Coyote SL 36 safely with the manual. However, if unsure about gas connections, hire a licensed professional.

Q: How much clearance is needed around the grill?
A: At least 10 feet from any walls, overhangs, or combustible surfaces.

Q: Can I install it on a patio or deck?
A: Yes, but use non-combustible surfaces and follow manufacturer safety instructions.

Q: Do I need special tools for assembly?
A: Most assemblies use standard tools included in the package. A wrench, screwdriver, and level are typically sufficient.

Testing and First Use

Once your grill is installed:

1. Turn on all burners to ensure they ignite evenly.
   
   

2. Let the grill burn on medium heat for 10–15 minutes to burn off any manufacturing residue.
   
   

3. Check that the rotisserie spins smoothly and shelves are stable.
   
   

4. Adjust any burners or flame levels as needed for even heat distribution.
   
   

This initial test ensures your Coyote SL 36 works perfectly before cooking your first meal.

Creating a Stress-Free Cooking Routine

Once installed, the Coyote SL 36 grill can transform your backyard cooking. Here’s how:

• Preheat the grill 10 minutes before cooking.
  
  

• Use direct heat for searing steaks and burgers.
  
  

• Use indirect heat for chicken, pork roasts, or fish.
  
  

• Side burners are perfect for sauces or sautéed vegetables.
  
  

• Keep cleaning tools handy to maintain a safe and clean cooking environment.
  
  

By following a structured routine, every cookout becomes enjoyable and consistent.

Where to Learn More and Explore Accessories

For more grilling tips, models, and accessories, check out the Coyote Outdoor Grills collection or explore the flagship Coyote SL 36 Grill product page.